SprogII Screen Shots

Below are most of the main screens from SprogII.

This is the Main Screen where you enter all Mode information. Some options are disabled depending on the radios functionality. The Current display is for a SyntorX VHF radio. Scan Control is supported and simply checking the box for the channel that is to be included in this modes scan list.

The Hex Inspector allow you to view any file in a hex format. The display can show as Bytes or Nibbles. In addition the display data can be shown as Byte Data that is 'unpacked' to a nibble view. Last option is the Invert Data which simply inverts the value of all displayed values. Not real usefull, but another check box.

This Dialog Box is show when you first create a new configuration. It allows you to chose the radio type (all VHF,UHF,LB, No Truncking or 800mhz) and all models of SyntorX, Syntor, MCX-100. The number of supported modes that you would like to have that corrosponds to what the radio supports, and the injection type. The default injection for the radio is always the default.

The import window will allow the import of a different (or same) radio into the current one. It will allow you to create a configuration for a SyntorX and use that on a MCX-100 as an example. Option to import only specific items are included, as well as an import status that will show problems of importing illegal values such as out of range frequencies etc.

The Last 4 Shots show the various tabs on the Generate Image window. This is where you set up the ordering of the Modes (if you desire), radios specific options, Output file types and formats, and the display of the PIN diode settings (for experts). After you have changed any options you simply press the 'Generate' button and the prom image will be output to the specified files. In this case the SyntorX only has one file that has all the information in it. Other radios would have the PL File and Scan File options enabled